UNI-JACK

​

The Uni-Jack is a light-weight and portable pipe rack jack, purpose built for lifting individual lines at a time up to 8" in diameter. It is exceptionally quick and easy to install while being sturdy enough to provide safe access to the touchpoint area.

 

This jack comes in 3 models; a 4", 6" & 8" which can each lift their specified line size and all sizes smaller.

​

The lifting pipe features a load bearing and low friction Vesconite roller to prevent damage to the line being lifted and any protective coating, and it's slender design allows it to fit with just 1" of clearance between adjacent lines.

 

Each of the 3 models has a rated lifting capacity based on calculated line weight that assumes a 'worst case' support spacing, design & operating conditions and a 4" lift height to ensure all lines of a specific diameter are within the lifting capacity of the jack model.

 

The jacks are activated using a light-weight hydraulic setup with a pressure gauge to ensure the correct amount of force is being applied to lift the line as per the Stress Analyses calculation.

​

Safely lifts up to 4" from I-beam supports ranging in size from 4" to 12" in height with lifts being achievable from any other size and shape support. Please reach out to us with your specific lifting requirements and we can engineer a solution that works for you.

​

​

Specifications

​

• Lift individual lines up to 8" in diameter.​

​

• Remote hydraulic lifting.

​

• Manual lifting using ratchet spanner.

​

• Mechanical lockout.​

​

• 4" standard lift height with 6" lift heights achievable.

​

• Handling weight is 11 lbs per arm.

​

• Lifting capacity sufficient to lift specified line size operating at maximum loading conditions.

​

​